Brother MFC 8220 - Manual (Page 186)

G - 4 GLOSSARY
Overseas Mode Makes temporary changes to the fax tones to
accommodate noise and static on overseas phone lines.
Pause Allows you to place a 3.5 second delay in the dialling
sequence stored on Speed-Dial numbers. Press Redial/Pause
as many times as needed for longer pauses.
Photo resolution A resolution setting that uses varying shades of
gray for the best representation of photographs.
Polling The process of a fax machine calling another fax machine
to retrieve waiting fax messages.
Pulse A form of rotary dialling on a telephone line.
Quick Dial List A listing of names and numbers stored in
Speed-Dial memory, in numerical order.
Real Time Transmission When memory is full, you can send faxes
in real time.
Remaining jobs You can check which jobs are waiting in memory
and cancel jobs individually.
Remote Activation Code Press this code ( 51 ) when you answer
a fax call from an extension or external phone to transfer the call
to the MFC.
Remote Retrieval Access The ability to access your MFC remotely
from a touch tone phone.
Remote Access Code Your own four-digit code that allows you to
call and access your MFC from a remote location.
Resolution The number of vertical and horizontal lines per inch.
See: Standard, Fine, Super Fine and Photo.
Ring Delay The number of rings before the MFC answers in Fax
mode.
Ring Volume Volume setting for the MFC’s ring.
Scanning The process of sending an electronic image of a paper
original document into your computer.
Speed-Dial A pre-programmed number for easy dialling. You must
press the Search/Speed Dial key and then # , and the three digit
code to start the dialling process.