Brother MFC 8220 - Manual (Page 73)

SETUP RECEIVE 5 - 5
Fax Detect
When you use this feature, you do not have to press Start or the Fax
Receive Code 51 when you answer a fax call. Selecting On allows
the MFC to receive fax calls automatically, even if you lift the handset
of an extension or external phone. When you see
Receiving on the
LCD or when you hear ‘chirps’ through the handset of an extension
phone connected to another wall socket/phone socket, just replace
the handset and your MFC will do the rest. Selecting
Off means you
will have to activate the MFC yourself by lifting the handset of an
external or extension phone, and then press
Start on the MFC
—OR—by pressing 51 if you are not at your MFC. (See Operation
from extension telephones on page 5-9.)
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu , 2 , 1 , 3 .
3
Use or to select On (or
Off ).
Press Set .
4
Press Stop/Exit .
If this feature is set to On , but your MFC does not connect a fax
call when you lift an extension or external phone handset, press
the Fax Receive Code
51 .
If you send faxes from a computer on the same phone line and
the MFC intercepts them, set Fax Detect to
Off .
Setup Receive
3.Fax Detect