Brother MFC 8220 - Manual (Page 72)

5 - 4 SETUP RECEIVE
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to Fax/Tel, you will need to decide how
long the MFC will signal you with its special pseudo/double-ring
when you have a voice call. (If it’s a fax call, the MFC prints the fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the MFC rings (for 20, 30, 40 or 70 seconds)
and no other phones on the same line will ring with the special
pseudo/double-ring. However, you can still answer the call on any
extension phone (in a separate wall socket/phone socket) or on the
same line as the MFC. (See Operation from extension telephones on
page 5-9.)
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu , 2 , 1 , 2 .
3
Press or to select how
long the MFC will ring to alert you
that you have a voice call.
Press Set .
4
Press Stop/Exit .
Even if the caller hangs up during the pseudo/double-ringing,
the MFC will continue to ring for the set time.
Setup Receive
2.F/T Ring Time