Brother MFC 8220 - Manual (Page 75)

SETUP RECEIVE 5 - 7
Reception into memory
As soon as the paper tray becomes empty during fax reception, the
screen will display
Check Paper ; please put some paper in the
paper tray. (See How to load paper on page 2-3.)
If the Memory Receive switch is ON at this time…
The current fax reception will continue, with the remaining pages
being stored in memory, if it is available. Subsequent incoming faxes
will also be stored into memory until the memory is full, following with
no further incoming fax calls will be automatically answered. To print
all data, put paper in the paper tray.
If the Memory Receive switch is OFF at this time…
The current fax reception will continue, with the remaining page(s)
being stored in memory, subject to available memory. Subsequent
incoming fax calls will not be automatically answered until fresh
paper is put in the paper tray. To print the last fax received, load
paper in the paper tray.
1
If it is not illuminated in green, press ( Fax ).
2
Press Menu , 2 , 1 , 6 .
3
Use or to select On (or
Off ).
Press Set .
4
Press Stop/Exit .
Setup Receive
6.Memory Receive