Brother MFC 8220 - Manual (Page 65)

GETTING STARTED 4 - 10
Sleep Time
Setting the Sleep Time reduces power consumption by turning off
the fuser inside the MFC, while it is idle. You can choose how long
the MFC is idle (from 00 to 99 minutes) before it goes into sleep
mode. The timer is automatically reset when the MFC receives a Fax
or PC data, or makes a copy. The default setting is 05 minutes. While
the MFC is in sleep mode, you will see
Sleep on the LCD. If you try
to print or copy in sleep mode, there will be a short delay while the
fuser warms up to working temperature.
1
Press Menu , 1 , 6 , 2 .
2
Use the dial pad to enter the length of time the MFC is idle
before it goes into sleep mode (00 to 99).
3
Press Set .
4
Press Stop/Exit .
■
If you want to turn sleep mode off, press Secure and
Job Cancel simultaneously and or to select Off
in Step 2.
■
If the MFC is in Sleep Mode when you change the Sleep
Time, the new setting will take effect the next time the MFC
copies, prints or is restarted.