Brother MFC 8220 - Manual (Page 67)

GETTING STARTED 4 - 12
Setting the Tray Use for Copy mode
If your MFC does not have the optional tray #2, you can skip this
setting. The default setting of
Auto allows * 1 your MFC to choose the
paper from the optional Tray #2 when paper is out in Tray #1 or
*
2
when the size of the original document will fit best on the paper in
Tray #2.
1
Press Menu , 1 , 8 .
2
Press or to select Tray#1
Only , Tray#2 Only or Auto .
3
Press Set .
4
Press Stop/Exit .
■
*1 Copies will automatically be printed from Tray #2 only if
the Paper Size setting for Tray #2 is the same as Tray #1.
■
*2 Copies will automatically be printed from Tray #2 if the
Paper Size setting for Tray #2 is different than Tray #1 and
this paper size is more suitable for the scanned original
document.
General Setup
8.Tray Use:Copy