Brother MFC 8220 - Manual (Page 119)

PRINTING REPORTS 9 - 1
9
Fax settings and activity
You need to set up the Transmission Verification Report and Fax
Journal Period in the menu table.
Press Menu , 2 , 4 , 1 .
—OR—
Press Menu , 2 , 4 , 2 .
Customizing the Transmission Verification
Report
You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whether the
transmission was successful (OK). If you select
On or On+Image , the
report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again. Selecting
On+Image or Off+Image will print a section of the fax’s first page
on the report to help you remember.
1
Press Menu , 2 , 4 , 1 .
2
Press or to select Off ,
Off+Image , On or On+Image .
Press Set .
3
Press Stop/Exit .
Printing reports
When the feature is Off , the Report will only print if there is a
transmission error. (NG).
Report Setting
1.XMIT Report
Report Setting
2.Journal Period
XMIT Report
On+Image