Brother MFC 8220 - Manual (Page 63)

GETTING STARTED 4 - 8
Setting the Ring Volume
You can turn the ring Off or you can select the ring volume level.
1
Press Menu , 1 , 4 , 1 .
2
Press or to select
( Low , Med , High or Off ).
Press Set .
3
Press Stop/Exit .
—OR—
You can adjust the ring volume when your MFC is idle (not being
used). In Fax mode , press or to adjust the volume level.
Every time you press these keys, the MFC will ring so you can hear
the active setting as the LCD shows it. The volume changes with
each key press. The new setting will stay until you change it again.
Setting the Beeper Volume
You can change the beeper volume. The default setting is Med .
When the beeper is on, the MFC beeps every time you press a key
or make a mistake and after a fax is sent or received.
1
Press Menu , 1 , 4 , 2 .
2
Press or to select your
option ( Low , Med , High or Off ).
Press Set .
3
Press Stop/Exit .
Volume
1.Ring
Volume
2.Beeper