Real time transmission, Real time transmission -8 – Brother MFC 8220 User Manual
Page 97
6 - 8 SETUP SEND
Real Time Transmission
When you are sending a fax, the MFC will scan the original
documents into the memory before sending. Then, as soon as the
phone line is free, the MFC will start dialing and sending.
If the memory becomes full, the MFC will send the original document
in real time (even if
Real Time TX
is set to
Off
).
Sometimes, you may want to send an important original document
immediately, without waiting for memory transmission. You can set
Real Time TX
to
On
for all original documents or for the next fax
only.
1
If it is not illuminated in green, press
(
Fax
). Load the
original document.
2
Press
Menu
,
2
,
2
,
5
.
3
To change the default setting, press
or
to select
On
(or
Off
).
Press
Set
.
Go to Step 5.
—OR—
For the next fax transmission only, press
or
to select
Next Fax Only
.
Press
Set
.
4
Press
or
to
select
Next Fax:On
(or
Next
Fax:Off
).
Press
Set
.
5
Press
1
if you want to choose more settings and the LCD will
return to the
Setup Send
menu.
—OR—
Press
2
if you have finished choosing settings.
6
Enter the fax number.
7
Press
Start
to send the fax.
Setup Send
5.Real Time TX