Brother MFC 8220 - Manual (Page 63)

4 - 2 GETTING STARTED
Setting the Station ID
You should store your name or company name and fax number so
they are printed on all fax pages that you send.
1
Press Menu , 0 , 3 .
2
Enter your fax number (up to 20
digits).
Press Set .
3
Enter your telephone number (up to 20 digits).
Press Set .
(If your telephone number and fax number are the same, enter
the same number again).
4
Use the dial pad to enter your name (up to 20 characters).
Press Set .
(See Entering text on page 4-3.)
5
Press Stop/Exit .
The LCD will show the date and time.
■
The telephone number you enter is only used for Cover
Page features. (See Composing the electronic Cover Page
on page 6-10.)
■
You cannot enter a hyphen.
If the Station ID has already been programmed, the LCD will ask
you to press
1 to make a change or 2 to exit without changing.
Initial Setup
3.Station ID