13 optional accessories, Memory board, Optional accessories -1 – Brother MFC 8220 User Manual

Page 182: Memory board -1, Optional accessories

Text mode
Original mode

OPTIONAL ACCESSORIES 13 - 1

Memory board

The memory board is installed on the main controller board inside the
MFC. When you add the optional memory board, it increases the
performance for both copier and printer operations.

Optional accessories

Optional Memory

32 MB TECHWORKS 12457-0001

64 MB TECHWORKS 12458-0001

128 MB TECHWORKS 12459-0001

In general, the DIMM must have the following specifications:

Type:

100 pin and 32 bit output

CAS Latency:

2 or 3

Clock Frequency:

100MHz or more

Capacity:

32, 64, 128 MB

Height:

1.4 inches (35 mm) or less

Parity:

NONE

DRAM Type:

SDRAM 4 Bank

Some DIMMs might not work with this MFC. For the latest
information from Brother visit:

http://solutions.brother.com