Brother MFC 8220 - Manual (Page 74)

GETTING STARTED 4 - 13
Setting the Tray Use for Fax mode
If your MFC does not have the optional tray #2, you can skip this
setting. The default setting of
Auto allows your MFC to choose the
paper from the optional Tray #2 if Tray #1 is out of paper or if
incoming faxes will fit best on the paper in Tray #2.
1
Press Menu , 1 , 9 .
2
Press or to select Tray#1
Only , Tray#2 Only or Auto .
3
Press Set .
4
Press Stop/Exit .
If Auto Reduction is turned on, incoming faxes will be printed
from the tray that is set for Auto Reduction. (See Printing a
reduced incoming fax (Auto Reduction) on page 5-5.)
General Setup
9.Tray Use:Fax