Brother MFC 8220 - Manual (Page 193)

G - 3 GLOSSARY
F/T Ring Time The length of time that the Brother MFC rings (when
the Receive Mode setting is Fax/Tel) to notify you to pick up a
voice call that it answered.
Fax Activity Report Lists information about the last 200 incoming
and outgoing faxes. TX means Transmit. RX means Receive.
Fax Forwarding Sends a fax received into the memory to another
pre-programmed fax number.
Fax Receive Code Press this code ( 51 ) when you answer a fax
call from an extension or external phone to transfer the call to the
MFC.
Fax Storage You can print stored faxes later at your MFC, or
retrieve them from another location using the Remote Retrieval
operations.
Fax/Tel You can receive faxes and telephone calls. Do not use this
mode if you are using a telephone answering device (TAD).
Fax tones The signals sent by sending and receiving fax machines
while communicating information.
Fine resolution Resolution is 203 x 196 dpi. It is used for small print
and graphs.
Gray scale The shades of gray available for copying and faxing
photographs.
Group number A combination of One-Touch, Speed-Dial numbers
that are stored as a Speed-Dial number for Broadcasting.
Help list A printout of the complete Menu that you can use to
program your MFC when you do not have the User’s Guide with
you.
Interval The pre-programmed time period between automatically
printed Activity Reports. You can print Activity Reports on demand
without interrupting this cycle.
LCD (liquid crystal display) The display screen on the MFC that
shows interactive messages during On-Screen Programming and
shows the date and time when the MFC is idle.
Manual fax When you lift the handset of the MFC or press
Hook/Hold so you can hear the receiving fax machine answer
before you press Start to begin transmission.