Brother MFC 8220 - Manual (Page 111)

7 - 3 AUTO DIAL NUMBERS AND DIALING OPTIONS
Storing Speed-Dial numbers
You can store Speed-Dial numbers, so that when you dial you will
only have to press a few keys (
Search/Speed Dial , # , the
three-digit number, and Start ). The MFC can store 300 Speed-Dial
numbers.
1
Press Menu , 2 , 3 , 2 .
2
Use the dial pad to enter a three-digit
Speed-Dial location number
(001-300).
(For example, press 005 .)
Press Set .
If you have not installed the optional LAN board (NC-9100h), go
to Step 4.
—OR—
If you have installed the optional LAN board (NC-9100h), the
MFC will ask you if the Speed-Dial is for a fax/telephone number
or an E-mail address. Go to Step 3.
3
Press or to select
Fax/Tel .
Press Set .
4
Enter the phone or fax number (up to 20 digits).
Press Set .
—OR—
If you purchased the optional NC-9100h, you can select
E-Address in Step 3 and then press Set .
5
Use the dial pad to enter the name (up to 15 characters).
Press Set .
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Press Set to store the number without a name.
6
Go to Step 2 to store another Speed-Dial number.
—OR—
Press Stop/Exit .
Set Auto Dial
2.Speed-Dial
Speed-Dial
Fax/Tel