Brother MFC 8220 - Manual (Page 62)

GETTING STARTED 4 - 1
4
Initial Setup
Setting the Date and Time
Your MFC displays the date and time and if you set up the Station ID
it prints on every fax you send. If there is a power failure, you may
have to reset the date and time. All other settings will not be affected.
1
Press Menu , 0 , 2 .
2
Enter the last two digits of the year.
Press Set .
3
Enter two digits for the month.
Press Set .
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Press Set .
(For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Press Set .
(For example, enter 15:25 for 3:25 P.M.)
6
Press Stop/Exit .
The LCD now shows the date and time whenever the MFC is in
Standby mode.
Getting started
Initial Setup
2.Date/Time