Brother MFC 8220 - Manual (Page 104)

SETUP SEND 6 - 15
Overseas Mode
If you are having difficulty sending a fax overseas due to possible
interference on the phone line, we recommend that you turn on the
Overseas Mode. After you send a fax using this feature, the feature
will turn itself off.
1
If it is not illuminated in green, press ( Fax ). Load the
original document.
2
Press Menu , 2 , 2 , 9 .
3
Press or to select On (or
Off ).
Press Set .
4
Press 1 if you want to choose more settings and the LCD will
return to the Setup Send menu.
—OR—
Press 2 if you have finished choosing settings.
5
Enter the fax number you’re calling.
6
Press Start .
■
If you did not use up any of the numbers for Groups,
access codes or credit card numbers, you can ‘broadcast’
faxes to as many as 382 different numbers.
■
The available memory will vary depending on the types of
jobs in the memory and the number of locations used for
broadcasting. If you broadcast to the maximum numbers
available, you will not be able to use Dual Access and
Delayed fax.
■
Enter the long dialing sequence numbers as you would
normally, but remember that each One-Touch and
Speed-Dial number counts as one number, so the number
of locations you can store becomes limited.
■
If the memory is full, press Stop/Exit to stop the job or if
more than one page has been scanned, press Start to
send the portion that is in the memory.
Setup Send
9.Overseas Mode