Brother MFC 8220 - Manual (Page 115)

7 - 7 AUTO DIAL NUMBERS AND DIALING OPTIONS
Pause
Press Redial/Pause to insert a 3.5-second pause between
numbers. If you are dialing overseas, you can press Redial/Pause
as many times as needed to increase the length of the pause.
Tone or Pulse (Canada only)
If you have a Pulse dialing service, but need to send Tone signals
(for example, for telephone banking), follow the instructions below. If
you have Touch Tone service, you will not need this feature to send
tone signals.
1
Lift the handset.
2
Press # . Any digits dialed after this will send tone signals.
3
When you hang up, the MFC will return to the Pulse dialing
service.
Telephone (voice) operations
Making a telephone call
1
Pick up the handset.
—OR—
Press Hook/Hold .
2
When you hear a dial tone, dial the call using the dial pad,
One-Touch, Speed-Dial and Search.
To hang up, replace the handset.
Hold
1
Press Hook/Hold to put a call on Hold.
2
You can put down the handset without disconnecting the call.
3
Pick up the MFC handset to release call from Hold. Picking up
the handset of an extension phone will not release call from Hold.
If you pressed Hook/Hold to dial, pick up the handset when the
other person answers. (The speaker works only one way. The
other person will not be able to hear you unless you pick up the
handset.)