Brother MFC 8220 - Manual (Page 112)

AUTO DIAL NUMBERS AND DIALING OPTIONS 7 - 4
Changing One-Touch and Speed-Dial numbers
If you try to store a One-Touch or Speed-Dial number where a
number has already been stored, the LCD will show the name that
has been stored there (or number) and will ask you to do one of the
following:
1
Press 1 to change the stored
number.
—OR—
Press 2 to exit without making a change.
2
Enter a new number.
Press Set .
■
To erase the whole number or whole name, press
Clear/Back repeatedly until all digits or letters are deleted.
To erase one digit or letter, use or to position the
cursor under it, and then press Clear/Back .
■
If you want to insert characters, use or to position the
cursor where you want to insert them, and then type.
3
Follow the directions beginning at Step 6 in Storing One-Touch
Dial numbers and Storing Speed-Dial numbers. (See Storing
One-Touch Dial numbers on page 7-1 and Storing Speed-Dial
numbers on page 7-3.)
#005:MIKE
1.Change 2.Exit