Apple Xserve G5 - Manual (Page 87)

Appendix A Specifications 87
4: DTE ready (DRT CD)
5: Signal ground (SGND)
6: DCE ready (DCR CC)
7: Request to send (RTS)
8: Clear to send (CTS)
9: Ring indicator (RI)
Power Supply
AC line input
• Line voltage/current: 100–240 V alternating current (AC), 5.5A maximum, single phase,
set automatically
• Frequency: 50–60 hertz (Hz)
Power Requirements for Devices You Can Connect
Expansion cards
• Maximum power consumption by two PCI-X cards combined is 30 W total
• 12-inch PCI-X card slots
• Data width: 32 or 64 bits
• Frequency: 33, 66, 100, or 133 MHz
• Power: 3.3 V
• Length: 7 or 12 in.
FireWire devices
• The computer can provide up to 15 W total to all FireWire ports combined.
• Output voltage range: Approximately 13 to 30 V
• Output power range: Up to 15 W
USB 2.0 devices
• Each of the computer’s built-in USB ports is allotted 500 mA.
System Clock and Battery
CMOS custom circuitry with long-life lithium battery. You can replace the computer’s
battery (see “Replacing the Battery” on page 83) with a new one purchased from an
Apple-authorized dealer.