Apple Xserve G5 - Manual (Page 81)

Chapter 6 Installing or Replacing Server Components 81
Depending on which slot has a card in it and how many cards you want to install, you
may need to remove a card to install another PCI-X card in the second (empty) slot.
6 To prepare to install a card, do one of the following:
• If you need to remove a card, grasp it on the sides and carefully pull it toward the
side of the server.
Set the card on a cushioned surface, taking care not to touch the connectors.
• If no card is in the slot, be sure to remove the slot cover (which came loose when you
loosened the cover’s thumbscrew on the back panel).
7 Remove the card you’re installing from its packaging and hold it by its corners, taking
care not to touch the gold connectors or any of the components on the card.
Pull the PCI card to the side to disengage
it from the PCI riser, and then pull it up and
out of the server.