Apple Xserve G5 - Manual (Page 29)

Chapter 3 Installing Your Server in a Rack 29
Important: Keep the protector for the optical drive slot and put it in the drive’s slot
whenever you move the system from one location to another or pack it for shipping.
6 Loosen the two thumbscrews (one on each side) at the front of the server’s enclosure.
These thumbscrews are “captive” and do not separate from the enclosure.
7 Remove the cover of the server’s enclosure by sliding it toward the back of the unit.
With the server resting on a flat, clean,
and stable surface, unscrew the two
thumbscrews on the front panel.