Apple Xserve G5 - Manual (Page 30)

30 Chapter 3 Installing Your Server in a Rack
Hold the front thumbscrews to keep the main part of the server in place as you slide
the cover toward the back.
8 When the cover is almost off, press the release latches at the sides of the server’s
interior to release the cover, then take the cover off.
When you’ve removed the cover, set it aside.
With the
server resting
on a flat, clean,
and stable surface,
slide the cover
completely to the
rear. Press these
two latches to
release the cover
from the server
and remove it.