Apple Xserve G5 - Manual (Page 73)

Chapter 6 Installing or Replacing Server Components 73
3 Touch the metal enclosure to discharge any static electricity.
Important: Always discharge static electricity before you touch any parts or install any
components inside the computer. To avoid generating static electricity, do not walk
around the room until you have finished installing the expansion card, memory, or
internal storage device and have closed the computer.
4 Unplug the power cord.
5 Loosen the thumbscrews at the front of the server’s cover.
Warning: The power supply in your computer is a high-voltage component and
should not be opened for any reason, even when the computer is off. If the power
supply needs service, contact your Apple-authorized dealer or service provider.
Unscrew the two
thumbscrews to
release the server.