Apple Xserve G5 - Manual (Page 52)

52 Chapter 3 Installing Your Server in a Rack
2 Position the cover in the rack at the desired location and screw the flange of the L-
shaped bracket to the front of the rack on each side.
Important: Be sure to work with another person for this part of the installation. The
cover should be held level to avoid changing its shape before the screws are inserted
to hold it in place.
Be careful not to overtighten the flange screws. Doing so could change the shape of
the cover slightly and make it difficult to slide the server into the cover.
3 Lift the server to the level of the cover and slide the server into the cover.
Attach the cover to
the telco rack mounting
posts using four of the
screws provided.
Insert the server into the cover and slide it all the way back.