Blue-White Sonic-Pro Hybrid Ultrasonic Flowmeters - Manual (Page 9)

Page 9 Sonic-Pro
Industries, Ltd. Industries, Ltd.
ProSeries
by Blue-White Ind.
TM
1.8
Wiring
Compartment
WIRING COMPARTMENT LAYOUT
INDICATOR LIGHTS
INPUT POWER (green)
FAULT CONDITION (red)
METER STATUS (yellow)
FRONT COVER PLATE REMOVED
SETUP BUTTON (white)
INDICATOR LIGHTS
FUSE
WIRING COMPARTMENT
The wiring access door on the front of the flowmeter enclosure only must be
removed to access the wiring terminal blocks, motherboard controls (a setup button and
the measurement mode switch) and to view the status LEDs.
The meter is factory set for transit time operation.
There are no user serviceable items inside the rear enclosure.
RS232
USB ETHERNET
RS485
PROCESS CONTROL RELAYS
(THREE EACH) 10A 250V AC
R1
R2
R3
COM
NC
NO
COM
NC
NO
COM
NC
NO
TRANSDUCER
INPUTS
Tx 1 Tx 2
RED (+) RED (+) BLK (-) BLK (-) GRN GRN
mA Hz
POS (+) NEG (-) GRN
SIGNAL
OUTPUTS
NEG (-) POS (+)
DC AC
DC (+) DC (-) GRN
AC LINE AC NTRL
POWER INPUT
SD CARD
DATA LOG
(REMOVE)
MODE SWITCH
T D
INDICATOR
LIGHTS
COMMUNICATIONS
CONNECTOR PANEL
WARNING
INPUT POWER LIMITS
AC INPUT
110~240Vac 50/60Hz-40W
DC INPUT
15~30 Vdc-40W
SETUP BUTTON 1A 250V (5x20mm)
slow blow
littlefuse 239001.XP
FUSE
CAUTION
risk of electric shock
RED (+) BLK (-) GRN
DOPPLER / TRANSIT TIME
MODE SELECT SWITCH
(factory set for transit time mode)
12-30
AWG