Blue-White Sonic-Pro Hybrid Ultrasonic Flowmeters - Manual (Page 38)

Industries, Ltd. Industries, Ltd.
ProSeries
by Blue-White Ind.
TM
Page 38 Sonic-Pro
Batch Dispensing Settings --> Default
Batch Amount allows you to set a default
batch volume for the relay channel. On the
Process Control run screen for this
channel, the user is able to change the batch
volume. Values edited on that screen are not
saved in the Configuration Set and the
default will be restored if the flowmeter
restarts.
Batch Dispensing Settings --> Batch Start
Mode allows you to select the batch start
mode to be manual (the relay is manually
ENTER Ç ESC È
Configuration Set #3
Ê
Process Control Setup
Relay Channel #2
Error Trigger Settings
Type of Trigger
Ê
Fault
Ê
Warning
Ê
Fault or Warning
ENTER Ç ESC È
Configuration Set #3
Ê
Process Control Setup
Relay Channel #2
Batch Dispensing Settings
Default Batch Amount
К
К
Batch Start Mode
Relay Timer
energized by pressing the front panel soft button, remains energized until the batch
amount has passed through the flowmeter and then de-energizes) or automatic (every
time the batch amount is observed to pass through the flowmeter, the relay energizes for
a configured time and then de-energizes).
Batch Dispensing Settings --> Relay Timer allows you to specify the time for which the
relay energizes for each batch in automatic batch start mode.
Error Trigger Settings --> Type of Trigger
allows you to specify the type or error that
will trigger an alarm and energize the relay.
Faults and warnings are described in
section 4.8.
5.4.4
Process Control
Setup
(continued)