Blue-White Sonic-Pro Hybrid Ultrasonic Flowmeters - Manual (Page 63)

Page 63 Sonic-Pro
Industries, Ltd. Industries, Ltd.
ProSeries
by Blue-White Ind.
TM
When opening the software, a connection
type must be selected. Chose ETHERNET,
RS-232 or USB.
If connecting via ETHERNET, select a
meter from the pull-down menu and press
DONE to activate the selected meter. If the
display does not activate of if some of the
data is not displayed, disconnect the meter
by clicking on OPERATION in the upper left
corner pull down menu and click
DISCONNECT. Re-select the meter and
press DONE.
To ADD a new meter to the pull-down
menu, press ADD, input a name for the new
meter, input the meter IP ADDRESS and IP
PORT number (usually 26000). Note that
the Sonic-Pro default IP Address is
9.1
Software
Installation
This section describes the Sonic-Pro User PC Software application.
Any Sonic-Pro model can be equipped with a Communications Package that includes
circuitry, connector panel and custom Sonic-Pro User PC Software. When connected to a
computer running the Sonic-Pro software, any model can perform the Model S3
9.0 Sonic-Pro User PC Software
9.2
Making
connections
9.2.1
Ethernet
Connection
functions described in this manual including
program editing and data logging downloads
directly into the PC.
The Sonic-Pro Software user interface
mimics the S3 model 5-button touch pad so
learning to use the software application is
simple. Simply clicking on the buttons is the
same as pressing the buttons on the Sonic-
Pro SPU touch pad. Pressing and holding
shift while clicking on a button simulates
pressing and holding a button on the touch
pad.
The Sonic-Pro Software installation files are located on the CD that was shipped in the
Sonic-Pro. Open the CD and double click SETUP. Follow the instructions to install the
Sonic-Pro software onto your PC.
192.100.100.023. Press SAVE EDITS. The IP ADDRESS must match the IP address
configured in the meter SPU. See section 5.2.1 of this manual. If the meter is installed