Avaya 1140E - Manual (Page 159)

Additional call features
159
Additional call features
Contact your system administrator to determine if the following call
features are available on your IP Deskphone.
• “Using AutoDial Transfer” on page 159
• “Using the Buzz signal” on page 160
• “Using Call Page Connect to make an announcement” on page 160
• “Using Centrex/Exchange Line Switchhook Flash” on page 161
• “Charging a call or charging a forced call” on page 162
• “Using Enhanced Override” on page 165
• “Using Forced Camp-on feature” on page 166
• “Overriding a busy signal” on page 167
• “Using Privacy Release” on page 168
• “Using Radio Page” on page 168
• “Using Voice Call” on page 171
Using AutoDial Transfer
Use the AutoDial Transfer feature to transmit digits through your AutoDial
key to the Central Office after a Trunk Switchhook Flash. You must be on
a Central Office/Exchange (CO) trunk call from or to a CO that offers
Centrex or exchange line-type features.
To use AutoDial Transfer when picking up an incoming trunk call:
1. Press the Centrex Switchhook Line
Flash key and wait for an interrupted dial
tone.
2. Press the AutoDial key to call the
number desired.
CentrexSHF
Autodial