KROHNE BM 102 Handbook - Manual (Page 87)

BM 102 87
8.4.6 F9
Colors
Change colours used on PCSTAR display board. 16 are available.
F1 – Help
On-line PCSTAR Help
F2 – Exit and save Saves new settings for the screen elements concerned
F3 – Exit Exit to main title window without saving modified elements.
F4 – Default colors Reset to original colour scheme
Modifiable color parameters
Screen elements
Chosen component
Select display
window from the
drop-down menu Selected by scrolling through a drop-down menu or by clicking
on the element concerned. Click on colour palette to select
colour and press F2 to save modified settings and exit.
Tank Background, tank, text, level, interface level, shadow,
information background, information text and light.
Current outputs Background, current outputs text, current output 2, current
output 1,shadow and light.
Measurement bar
graphs Background, level, text, distance, interface level, volume,
ullage volume, shadow and light.
Signal Background, dead zone ,frame, grid, signal, position arrow,
actual gain, other gains, shadow and light.
Trend/Markers Background, markers, frame, grid and position cursor
8.4.7 Other important PCSTAR 2 functions
Ctrl Alt R: BM 102 MICROFLEX – Reset
This resets the gauge from the main screen. This should be done before operating with a new
configuration. It empties the old data temporarily stored in the gauge memory and permits the gauge
to go through a series of checks to accept and operate with a new configuration.
Changing languages
Close PCSTAR 2. Go to “Start up” at the bottom of the desktop screen. Select menu “Programs”
then “KROHNE MICROFLEX BM102” from the options given and finally select “Change PCSTAR 2
language” from this submenu. A choice of three languages (English, French and German) is given.
Select the one required and confirm “OK” then re-open PCSTAR 2.