KROHNE BM 102 Handbook User Manual
Page 77
BM
102
77
This shows the real-time tank status. This screen is divided into three parts. In default layout for a
single output, this will show a bar with Current output and level graduations on the left hand side,
a representation of the tank with its contents in the middle (the top dead zone will be indicated as
a grey dotted line) and a bar with distance and level graduations on the right.
Functions available on this screen are:
F1-Help
On-line help (presents information given in this guide)
F2-Configuration
BM 102 user parameters.
F3-Exit
Disconnect from gauge
F4-Record
Configure PCSTAR to record data from the gauge over a given time
period
F6-Trend
level against recording time graph
F7-Oscillo(scope)
Voltage amplitude against distance from flange graph displaying all
reflections registered along the probe.
F8-Markers
Status markers on/off graph
F9-Colors
For modifying the colour of display screen elements
F10-Screen copy
Saving for printing this screen in bitmap format
F11-Dyn. Config
(dynamic configuration)
For changing the control threshold for detecting reflections manually.
Useful when there are obstructions causing parasite signals in the
tank.
These functions are described on the following pages.