KROHNE BM 102 Handbook - Manual (Page 31)

BM 102 31
Function
Input Range Description
1.4.0 User data
1.4.3 Checksum Read only This value is used for identification of
the device software version. The
checksum is tested when starting.
This helps to detect any problems
with the microcontroller.
1.4.4 Device number**
(Tag number)
00000 01
This parameter assigns an
identification number to the device.
A text consisting of max. 8 ASCII
characters can be entered.
1.4.5 Serial number Read only This parameter serves to identify the
respective measuring device. This
number cannot be changed and sets
the address for use with HART
®
interfaces.
1.4.6 French command number Read only Factory-programmed number, to be
quoted in case of warranty and
service claims.
1.4.7 German command
number Read only Factory-programmed number, to be
quoted in case of warranty and
service claims.
1.4.8 Option**
(Descriptor) This function can be used for entering
text of max. 15 ASCII characters
(customer information only)
Single rod, Twin rod,
Single cable, Single
cable +
counterweight, Single
cable without
counterweight, Twin
cable, Twin cable +
counterweight,
Coaxial, Special 1,
Special 2 or Special 3 1.4.9 Probe type
As per order
Information on probe type supplied
with signal converter. This is a read-
only parameter.
** Refer to section 3.3.5: Characters available for alpha-numerical data functions in PC STAR 2
and on the HART
®
console.