KROHNE BM 26 BASIC_ADVANCED EN - Manual (Page 78)

8
TECHNICAL DATA
78
BM 26 BASIC/ADVANCED
www.krohne.com 10/2012 - 4000347004 - HB BM26 Basic/Adv R04 en
8.10 Floats
Make sure that the devices are used within the operating limits of the floats. Refer to the table
and graphs that follow:
BM 26 Basic: Application limits of floats in °C, bar and kg/l
BM 26 Basic: Application limits of floats in °F, psi and lb/ft³
BM 26 Advanced: Application limits of floats in °C, bar and kg/l
BM 26 Advanced: Application limits of floats in °F, psi and lb/ft³
Dimensions Material Density
range
Maximum operating pressure [barg]
[mm] [kg/l] 20°C 100°C 150°C
Float Ш32 Ч 245 316L 0.80…1.19 16 15.1 13.7
Dimensions Material Density
range
Maximum operating pressure [psig]
[inches] [lb/ft³] 70°F 210°F 300°F
Float Ш1.3 Ч 9.6 316L 49.9…74.3 232 219 199
Dimensions Material Density
range
Maximum operating pressure [barg]
[mm] [kg/l] 20°C 100°C 150°C 200°C 250°C 300°C
Float 1 Ш32 Ч 420 Titanium 0.58…0.7 40 37.9 34.4 31.8 29.8 27.6
Float 2 Ш32 Ч 240 Titanium 0.7…0.99 40 37.9 34.4 31.8 29.8 27.6
Float 3 Ш32 Ч 185 316L 1 0.99…2.0 40 37.9 34.4 31.8 29.8 27.6
1 Hastelloy® C-276 is available on request
Dimensions Material Density
range
Maximum operating pressure [psig]
[inches] [lb/ft³] 70°F 210°F 300°F 390°F 480°F 570°F
Float 1 Ш1.3 Ч 16.5 Titanium 36.2…43.7 580 449 500 461 432 400
Float 2 Ш1.3 Ч 9.4 Titanium 43.7…61.8 580 449 500 461 432 400
Float 3 Ш1.3 Ч 7.3 316L 1 61.8…124.8 580 449 500 461 432 400
1 Hastelloy® C-276 is available on request