KROHNE BM 26 BASIC_ADVANCED EN - Manual (Page 34)

6
OPERATION
34
BM 26 BASIC/ADVANCED
www.krohne.com 10/2012 - 4000347004 - HB BM26 Basic/Adv R04 en
Equipment needed
• Sheet of stickers with measurement units (mm, inches and %)
• Small slotted tip screwdriver (not supplied)
Get access to the keypad on the indicator board
1 Remove the transmitter housing cover.
2 Remove the screws that hold the indicator board on the housing.
3 Turn the indicator board to use the 3-button keypad ([
], [F F F F] and [ ]) on the back of the board
to change the units. Refer to the tables that follow for key functions and the example proce-
dure for configuration of the indicator.
4 Attach the indicator board to the housing.
5 Put the sticker with the correct measurement unit over the default units under the indicator
screen.
6 Attach the transmitter housing cover.
Figure 6-3: Get access to the keypad on the indicator board