KROHNE BM 26 BASIC_ADVANCED EN - Manual (Page 57)

TECHNICAL DATA
8
57
BM 26 BASIC/ADVANCED
www.krohne.com 10/2012 - 4000347004 - HB BM26 Basic/Adv R04 en
Installation conditions
Notes The switch is not attached to the measuring chamber before delivery
Adjust the switch position for hysteresis and liquid density
Dimensions and weights Refer to "Technical data: Dimensions and weights"
Materials
Switch housing Aluminium with epoxy powder paint
Bracket Stainless steel
Clamp Stainless steel
Electrical connections
Cable entry M16 × 1.5
Control input Control input Control input Control input
Switching capacity 60 VA/W; 1 A; 250 VAC/VDC According to NAMUR 19234
Intrinsically-safe circuit data Refer to supplementary instructions or approval certificates.
Approvals and certifications
CE This device fulfils the statutory requirements of the EC directives.
The manufacturer certifies successful testing of the product by
applying the CE mark.
Explosion protection Explosion protection Explosion protection Explosion protection
ATEX II 1 G Ex ia IIC T6...T4
Other standards and approvals Other standards and approvals Other standards and approvals Other standards and approvals
LVD Low-Voltage Directive
2006/95/EC in conjunction with
EN 61010-1 (2001)
-
Vibration resistance Vibration class 4M5 according to EN 60721-3-4
Version Non-NAMUR NAMUR