KROHNE BM 26 BASIC_ADVANCED EN - Manual (Page 66)

8
TECHNICAL DATA
66
BM 26 BASIC/ADVANCED
www.krohne.com 10/2012 - 4000347004 - HB BM26 Basic/Adv R04 en
8.6 Advanced version: Dimensions and weights
Note:
• C-C = Centre-to-centre length (process connections)
• ML = Measuring length
• L = Overall length
• a = Distance from the axis of the bottom connection to the bottom of the device;
b = Distance from the axis of the top connection to the top of the device
Advanced version: Lateral / Lateral process connections
Figure 8-6: Lateral / Lateral process connections
1 Optional vent with 3/8 NPT connection (with plug) , or optional vent with 1/2 NPT, G 1/2 or G 3/8 connection (with plug)
on a plate flange, or drain with 1/2 NPT, 3/8 NPT, G 1/2 or G 3/8 connection (with plug) on a plate flange
2 Process connection (flange)
3 Welded antenna option for the OPTIWAVE 7300 radar level transmitter with ¼ NPT connection for a flushing system
4 ½ BSP connection for OPTIFLEX 1300 TDR level transmitter with ½ NPT lateral vent (with plug)
5 Optional vent and drain (flange)
6 Optional DN40 top flange for other level transmitters
7 Optional limit switch
8 Level indicator with optional scale
9 Optional male thread (½... ¾ NPT or G ½...¾) or long stud (½¨ or ¾¨) connection
a