Operation – KROHNE UFC 400 FOUNDATION FIELDBUS EN User Manual
Page 57
OPERATION
4
57
UFC 400
www.krohne.com
05/2013 - 4002813701 - AD FF UFC 400 R01 en
CLOCK_PER
CLOCK_PER
CLOCK_PER
CLOCK_PER
Clock Period
Clock Period
Clock Period
Clock Period
R/W
Establishes the period for periodic reset, in seconds.
0
Setting:
Positive or 0
GOOD_LIM
GOOD_LIM
GOOD_LIM
GOOD_LIM
Good Limit
Good Limit
Good Limit
Good Limit
R/W
Sets the limit for PCT_INCL. Below this limit OUT receives the
status good.
0
Setting:
0...100%
GRANT_DENY
GRANT_DENY
GRANT_DENY
GRANT_DENY
Grant Deny
Grant Deny
Grant Deny
Grant Deny
R/W
Options for controlling access of host computers and local
control panels to operating, tuning and alarm parameters of
the block.
-
Grant
R/W
Depending on the philosophy of the plant, the operator or a
higher level device (HLD), or a local operator's panel (LOP) in
the case of Local, may turn on an item of the Grant attribute -
Program, Tune, Alarm or Local.
Uninitialized
Setting:
Program / Tune / Alarm / Local
Deny
R/W
The Denied attribute is provided for use by a monitoring
application in an interface device and may not be changed by
an operator.
Uninitialized
Setting:
Program denied / Tune denied / Alarm denied / Local denied
IN_1
IN_1
IN_1
IN_1
Input 1
Input 1
Input 1
Input 1
R/W
Input 1 of the Integrator Block.
-
Status
Status of IN_1
Value
Actual value
IN_2
IN_2
IN_2
IN_2
Input 2
Input 2
Input 2
Input 2
R/W
Input 2 of the Integrator Block.
-
Status
Status of IN_2
Value
Actual value
OUT_PTRIP
OUT_PTRIP
OUT_PTRIP
OUT_PTRIP
Output Pre Trip
Output Pre Trip
Output Pre Trip
Output Pre Trip
R/W
The second discrete output.
-
Status
R/W
Setting:
Good Non Cascade / Good Cascade / Uncertain / Bad Not
Connected / Bad
Bad Not Connected
Value
R/W
Setting:
0: Off / 1: On
0
Parameter
Parameter
Parameter
Parameter
DD name
Access
Description and settings
Initial Value