KROHNE UFC 400 FOUNDATION FIELDBUS EN - Manual (Page 45)

OPERATION
4
45
UFC 400
www.krohne.com 05/2013 - 4002813701 - AD FF UFC 400 R01 en
PIPE_ PIPE_ PIPE_ PIPE_
TEMPERATURE TEMPERATURE TEMPERATURE TEMPERATURE
Pipe temperature
R/W Input of operational temperature for correction of the thermal
expansion (Fct. C1.8).
20.0 °C
Settings:
-200.0…700.0 °C
PROTECT_INFO PROTECT_INFO PROTECT_INFO PROTECT_INFO
Access Protection
R Current protection level to restricted parameters. Uninitialized
Settings:
Write Lock / Custody Transfer / Production / Service level /
User / bit 5 / bit 6 / Concentration
PULSE_FORM PULSE_FORM PULSE_FORM PULSE_FORM
Pulse form
R/W Pulse form (Fct. D1.4) Sine
Settings:
Sine / Double sine
SECONDARY_ SECONDARY_ SECONDARY_ SECONDARY_
VALUE VALUE VALUE VALUE
Mass Flow Range
The measured value and status available to the Function
Block.
-
STATUS
Status
R Digital transducers, unlike their analogue versions, can detect
faults that make the measurement bad or prevent the
actuator from responding. This additional, valuable
information will be passed along with each transmission of a
data value in the form of a status attribute.
-
VALUE
Value
R A numerical quantity entered by a user or calculated by the
algorithm.
-
SECONDARY_ SECONDARY_ SECONDARY_ SECONDARY_
VALUE_RANGE VALUE_RANGE VALUE_RANGE VALUE_RANGE
Mass Flow Range
Defines the ends of the SECONDARY_VALUE, the units of the
SECONDARY_VALUE, and the decimal point position (number
of significant digits to the right of the point). The engineering
units must match the units selected in the parameter
XD_SCALE of the Analog Input Block that reads the channel
with this value.
-
EU_100
max value
R The engineering unit value which represents the upper end of
range of the associated Block Parameter.
200
EU_0
min value
R The engineering unit value which represents the lower end of
range of the associated Block Parameter.
0
UNITS_INDEX
Units Index
R/W Device Description units code index for the engineering unit
descriptor for the associated block value.
kg/h
Settings:
kg/s; kg/min; kg/h; kg/d; t/s; t/min; t/h; t/d;g/s; g/min; g/h;
g/d; lb/s; lb/min; lb/h; lb/d; klb(US)/s; klb(US)/min; klb(US)/h;
klb(US)/d; st/s = (Ston/s); st/min = (Ston/min); st/h = (Ston/h);
st/d = (Ston/d); lt/s = (LTon/s); lt/min = (Lton/min); lt/h =
(LTon/h); lt/d = (LTon/d)
DECIMAL
Decimal (Point)
R The number of digits to the right of the decimal point which
should be used by an interface device in displaying the
specified parameter.
0
SECONDARY_ SECONDARY_ SECONDARY_ SECONDARY_
VALUE_TYPE VALUE_TYPE VALUE_TYPE VALUE_TYPE
Secondary Value
Type
R The type of measurement represented by the secondary value.
For Example: Mass Flow, Absolute Pressure, Differential
Temperature.
Mass flow
Settings:
Mass flow
SENSOR_CAL_ SENSOR_CAL_ SENSOR_CAL_ SENSOR_CAL_
DATE DATE DATE DATE
Sensor Calibration
Date
R The date of the last sensor calibration. -
SENSOR_CAL_ SENSOR_CAL_ SENSOR_CAL_ SENSOR_CAL_
LOC LOC LOC LOC
Sensor Calibration
Location
R/W The last physical location at which the sensor was calibrated.
(ex. Acme Labs)
-
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value