KROHNE UFC 400 FOUNDATION FIELDBUS EN - Manual (Page 27)

OPERATION
4
27
UFC 400
www.krohne.com 05/2013 - 4002813701 - AD FF UFC 400 R01 en
GRANT_DENY GRANT_DENY GRANT_DENY GRANT_DENY
Grant Deny
R/W Options for controlling access of host computers and local
control panels to operating, tuning and alarm parameters of
the block.
-
GRANT
Grant
R/W Depending on the philosophy of the plant, the operator or a
higher level device (HLD) or a local operator's panel (LOP) in
the case of "Local", may turn on an item of the "Grant"
attribute - "Program, Tune, Alarm or Local".
Uninitialized
Setting:
Program / Tune / Alarm / Local / Operate
DENY
Deny
R/W The Denied attribute is limited for use by a monitoring
application in an interface device and may not be changed by
an operator.
Uninitialized
Setting:
Program denied / Tune denied / Alarm denied / Local denied /
Operate denied
HARD_TYPES HARD_TYPES HARD_TYPES HARD_TYPES
Hardware Types
R The types of hardware available as channel numbers. Scalar input
ITK_VER ITK_VER ITK_VER ITK_VER
ITK Version
(Interoperatibility Test
Kit)
R Major revision number of the interoperability test case used to
register this device.
5
LIM_NOTIFY LIM_NOTIFY LIM_NOTIFY LIM_NOTIFY
Limit Notify
R/W Maximum number of unconfirmed alert notify messages
allowed.
20
Setting:
0...255
MANUFAC_ID MANUFAC_ID MANUFAC_ID MANUFAC_ID
Manufacturer ID
R Manufacturer identification number - used by an interface
device to locate the DD file for the resource.
KROHNE
Setting:
KROHNE
MAX_NOTIFY MAX_NOTIFY MAX_NOTIFY MAX_NOTIFY
Maximum Notify
R Maximum number of unconfirmed alert notify messages
possible.
20
Setting:
0...255
MEMORY_SIZE MEMORY_SIZE MEMORY_SIZE MEMORY_SIZE
Memory Size
R Available configuration memory in the empty resource. To be
checked before attempting a download.
0
MIN_CYCLE_T MIN_CYCLE_T MIN_CYCLE_T MIN_CYCLE_T
Minimium Cycle Time
R Time duration of the shortest cycle interval of which the
resource is capable (in [1/32 ms]).
6400
NV_CYCLE_T NV_CYCLE_T NV_CYCLE_T NV_CYCLE_T
Nonvolatile Cycle
Time
R Interval between writing copies of NV parameters to non-
volatile memory. Zero means never (in [1/32 ms]).
256000
RESTART RESTART RESTART RESTART
Restart
R/W Allows a manual restart to be initiated. Several degrees of
restart are possible. They are 1: Run, 2: Restart resource, 3:
Restart with defaults and 4: Restart processor.
Run
Setting:
Uninitialized / Run / Resource / Defaults / Processor
RS_STATE RS_STATE RS_STATE RS_STATE
Resource State
R State of the function block application state machine. Standby
Setting:
Uninitialized / Start_Restart / Initialization / Online Linking /
Online / Standby / Failure
SET_FSTATE SET_FSTATE SET_FSTATE SET_FSTATE
Set Fault State
R/W Allows the fault state condition to be manually initiated by
selecting "Set".
Off
Setting:
Off
Parameter Parameter Parameter Parameter
DD name Access Description and settings Initial Value