Watlow Silver Series User Manual
Page 86
78
EZware5000 Series Programming Manual
Multiple objects can be created according to these parameters:
Pitch vs. Interval: This setting affects how EasyBuilder places the copies of an object on the screen relative to each
other. The Pitch setting will interpret the X Distance setting as the distance from the left side of an object to the left
side of the next object and the Y Distance setting as the distance from the top of one object to the top of another
object.
The Interval setting will interpret the X Distance setting as the distance from the right side of one object to the left
side of the next object. The Y Distance setting is the distance from the bottom of one object to the top of the next
object.
X, Horizontal Distance and Y, Vertical Distance: These settings determine the spacing (in pixels) between objects.
Quantity X and Quantity Y: These settings determine the number of copies to be made along the X axis (horizontal)
and the Y axis (vertical).
Left to right and Top to bottom: When Left to right is selected, objects are created and addressed in the X-axis first
and then in the Y-axis. When Top to bottom is selected, objects are created and addressed in the Y-axis first and then
in the X-axis.
Adjust Distance: This is the offset used when assigning a new address to each new copy. For example, if 1 is selected,
then EasyBuilder will add one to the address for each new copy made.
Using the Window Copy command
The Window Copy command is used to copy a window from an existing project into the project that you are currently
editing. This feature reduces time spent creating new projects since you can now use windows that you created for
other similar projects.
1. From the Edit menu, select Window Process and click Window Copy.... The Window Copy dialog box
appears.
2. In the Source project box, specify the path to the project that contains the window screen(s) you wish to
copy. Use the Browse... button
to navigate to the project if you are unsure of the location or name of
the project file.
3. In the Source boxes, enter the numbers of the window screen(s) you wish to copy. They must be consecutive
windows. If you are only copying one window, put the same window number in both boxes.
1010-1007, Rev. 10