Watlow Silver Series - Manual (Page 50)

42 EZware5000 Series Programming Manual
11. Click the Profile tab and set the Width to 100 and the Height to 25 (pixels).
12. Click OK to accept the properties. Click to place the Bit Lamp Object between the pump and the tank. You
can click and drag it to adjust its position once you have placed it on the window.
Now we will create a Set Bit Object to turn the pump and pipe on and off whenever the Up or Down Arrows (Set
Word Objects) are pressed.
 To create a Set Bit:
1. In the top menu bar in EasyBuilder 5000, click Objects > Button > Set Bit (or select the Set Bit icon in the
Object 1 Toolbar).
2. In the Set Bit Object’s Properties General tab, you can enter a description of the object such as Pump On.
Select LB for the Device Type and 0 for the Write address. Select Momentary for the Set Style.
1010-1007, Rev. 10