Watlow Silver Series - Manual (Page 56)

48 EZware5000 Series Programming Manual
3. Select Tools > Download from EasyBuilder’s menu (or click the Download icon).
4. Make sure that the USB, Firmware, and Reboot HMI After Download boxes are checked.
5. Click the Download button. If the HMI is properly connected to the PC, the status box on the download
dialog will update with messages indicating the progress of the transfer. The HMI itself will also display
messages reflecting its status.
6. When the download is complete, the HMI will restart and begin running your project. Click the Exit button on
the Download dialog.
Note: When connecting two powered devices, a difference in potential can exist between the ground reference
on each device. If there is a large difference in ground potential (voltage), making a connection via a USB cable
can complete a ground loop that may damage the HMI and PC. The connectors on the Maple Systems USB
Configuration Cable (P/N 7431-0115) are electrically isolated to prevent a potentially damaging ground loop, and
we recommend using this cable to connect the HMI to the PC. Maple Systems cannot be held responsible for any
damage to the HMI, PLC, or PC due to improper wiring. Please refer to page 5 of the Silver Series Installation Guide for
proper wiring instructions.
CONGRATULATIONS. You have completed your first EZware-5000 project. Select File > Exit to close EasyBuilder.
1010-1007, Rev. 10