Watlow Silver Series - Manual (Page 191)

Security 183
Additional Security Features
Project Password (MTP file)
Enable the Project Password in the System Parameter settings (Edit > System Parameters > Security tab). This secures
a project and prevents it from being modified without the proper password. When the Project Password is enabled,
you must enter the correct password in order to open the project in EasyBuilder-5000.
Project Protection
Enable Project Protection in the System Parameter settings (Edit > System Parameters > General tab). Use the Project
Protection feature to set a unique password (Project key) in the project that will cause the project to run only on
specific HMIs that have a matching password (HMI key).
1010-1007, Rev. 10