beautypg.com

Watlow Silver Series User Manual

Page 184

background image

176

EZware5000 Series Programming Manual

5. Click on the Event Display tab to display the Event Display dialog.

6. Include categories: To include all categories, set this at 0 to 0.

7. Select Click or Double-click to acknowledge event with a single or double touch in the acknowledge style

drop-down menu. Then select the maximum number of events to display in the Event Display (applies to

Real-time mode only). The valid range is 10-1000.

8. Select colors for Background, Frame, Select box, Acknowledge, and Return to normal.

9. Select the order in which events will be sorted, Time ascending or Time descending.

10. Check the Sequence no. check box to add a unique serial number to each event. Select the Event trigger

date and Event trigger time to have the date and time the event is triggered added to each event. Select

Acknowledge time and Return to normal time to have those times added to each event, and select Event

message to include the message defined for the alarm/event appear in the display.

11. Use the Display order list to arrange the order in which the selected event information is displayed, and

select the format for how the date and time is displayed in the Date: and Time: drop-down boxes.

12. Click the Shape tab to configure a background shape (if desired). Click the Font tab to configure the size of

the font.

13. Click OK and click in the work area of EasyBuilder to place the Event Display. Drag it to place it in the desired

location. Click and drag the corners to resize it.

1010-1007, Rev. 10