Watlow Silver Series - Manual (Page 81)

Using EZware-5000 73
Using the Window Tree to change object attributes
1. On the Window Tree, click + adjacent to any window number. The tree will expand to list the objects on that
window, as shown:
2. The Object ID of each object will be listed. For example, TX_0 is Text Display #0, ND_0 is Numeric Display #0,
etc.
3. To highlight a particular object on the screen, click on the Object ID in the list. This allows the quick selection
of a particular object, especially on crowded screens or screens where objects may be overlapping.
4. To display the object’s attribute dialog box, double-click the Object ID in the Window Tree.
Using the grid function
One display option is to have the work area covered with grid lines. These grid markings can be helpful when trying to
align objects that are created on the work area. If grid lines are selected, you can decide what size each grid is.
 Turning the Grid on and off:
1. On the Option menu, click Grid/Snap.
2. Click the Display box or click the Grid icon in the Standard toolbar to turn the grid on and off.
1010-1007, Rev. 10