Watlow Silver Series - Manual (Page 85)

Using EZware-5000 77
3. From the Edit menu, click Undo or click the Undo icon from the Standard Toolbar. You can also press
CTRL+Z. The deleted text box reappears.
4. The Redo command is used to cancel the Undo command.
 Using the Cut , Copy , and Paste commands
1. These commands are all selected from the Edit menu.
2. Select the graphics object or objects you wish to cut or copy.
3. Click Cut to copy and remove the graphics object(s) from the work area or click Copy to copy the graphics
object(s).
4. Objects cut or copied from one window can be pasted into other windows. Once the object has been
selected and cut or copied, open another window, then paste the object into that window.
5. The pasted object appears highlighted in the upper leftmost corner of the work area.
6. Move the object by clicking on the highlighted area and dragging it to the desired position.

Using the Multi-Copy command
The Multi-Copy command is used to make multiple copies of a single object on a screen. This is most useful when
creating new keyboards or data tables. In addition to copying the object, this command will automatically assign new
memory addresses to each object.
1. Select the object you wish to copy.
2. From the Edit menu, select Multi. Copy.... The Multi. Copy dialog box appears.
3. Modify the settings according to your requirements.
4. Click OK. The main screen of EasyBuilder is redisplayed with the Multi. Copy command executed.
1010-1007, Rev. 10