Watlow 8LS Controller - Manual (Page 53)

Setup
8LS User’s Guide 45
Setup
The Setup menus let you change the 8LS detailed configuration
information.
If you have not set up a modular system before, or if you don’t know
what values to enter, please read the next section first, Tuning and
Control, which contains PID tuning constants and useful starting values.
How to enter the Setup menus?
1. In Single Loop display, select the loop you wish to edit.
2. Enter this pass sequence: Enter, Alarm Ack, and Chng SP.
3. The first Setup menu appears.
How to edit a menu?
• Press Yes to select this menu or No to advance to the next menu.
(When you select a menu, the blinking question mark changes to an
equal sign.)
• Press Yes (up) or No (down) to toggle between the options.
• Press Enter to store the value you have selected, or Back to stop
editing and return to the main menu.
The Setup section contains detailed information about the submenus of
the main menus.
The next page shows a diagram of the six main menus (plus the Ramp/
Soak main menu if the option’s installed) and all their submenus.
ENTER
ALARM
ACK
CHNG
SP