Notice – Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" User Manual
Page 37
39
Installation
En
g
lish
NOTICE
BROKEN ENCLOSURE
• Attach the Overlay correctly with the installation.
• Do not reuse the Overlay removed once.
• Do not exert more than 0.8 N•m (7.1 lb-in) of torque when tightening the
installation screws.
• For use on a flat surface of a Type 1 Enclosure
• Attach correctly without a crevice between gaskets and between gasket
and the panel.
• Do not attach installation fastener in a different position from mounting
instruction.
Failure to follow these instructions can result in equipment damage.
This manual is related to the following products:
- GP4500R - 10.4 Standard HMIs with Rear Mounting Options" GP4400R - 7.5 Standard HMI with Rear Mounting Options" GP4300R - 5.7 Standard HMI with Rear Mount" GP4300M - 5.7 Modular HMI" GP4200M - 3.5 Modular HMI" GP4500 - 10.4 W Model HMI" GP4400 - 7.0 W Model HMI" GP4300 - 5.7 W Model HMI" GP4200 - 3.5 W Model HMI" GP4600 - 12.1 Standard HMIs" GP4500 - 10.4 Standard HMIs" GP4400 - 7.5 Standard HMI" GP4300 - 5.7 Standard HMI" GP4200 - 3.5 Standard HMIs"