Resin boss type, Notice, Panel unsteady when unsecured – Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" User Manual
Page 31
33
Installation
En
g
lish
5. Resin Boss Type
Installation procedure
NOTICE
PANEL UNSTEADY WHEN UNSECURED
• Keep GP unit stabilized in the panel-cut while you are installing or removing
the screw fasteners.
Failure to follow the instruction can result in equipment damage.
Step
Procedure Details
1
Follow the standard mount or flat mount panel cut dimensions to
perform sufficient tests in advance with designs that meet the
following conditions, confirm the safety of the system, and then
mold the resin plate.
'
(
&
&
%
%
$
$
Standard mount
Flat mount
This manual is related to the following products:
- GP4500R - 10.4 Standard HMIs with Rear Mounting Options" GP4400R - 7.5 Standard HMI with Rear Mounting Options" GP4300R - 5.7 Standard HMI with Rear Mount" GP4300M - 5.7 Modular HMI" GP4200M - 3.5 Modular HMI" GP4500 - 10.4 W Model HMI" GP4400 - 7.0 W Model HMI" GP4300 - 5.7 W Model HMI" GP4200 - 3.5 W Model HMI" GP4600 - 12.1 Standard HMIs" GP4500 - 10.4 Standard HMIs" GP4400 - 7.5 Standard HMI" GP4300 - 5.7 Standard HMI" GP4200 - 3.5 Standard HMIs"