Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" - Manual (Page 20)

22
Eng
lis
h
Installation
• Flat mount
a) Installation positions of stud bolts or positions of boss molds when
attaching installation brackets at the top and bottom surfaces of the GP
unit
b) Installation positions of stud bolts or positions of boss molds when
attaching installation brackets on either side of the GP unit
d) 4-M4 x 10L stud bolts (no foreign material present on the base due to
sparking or similar phenomena) or boss molds
e) Center of the display area
Note : If you are designing the panel with a material other than sheet metal, ensure that
the material has sufficient strength.
A
B
C
R
A1 A2
Panel
Type
Resin
Boss
Type
PFXGP4301
TADR
143mm (+0.5, -0mm) (5.63in.[+0.02, -0in.])
109mm
(+0.5, -0mm)
(4.29in.
[+0.02, -0in.])
1.6 mm
(0.06in.)
SPCC
(JIS G
3141) or
SECC(JIS
G 3313)
1.5 mm
(0.06in.)
SUS304
(JIS G
4305)
2 mm
(0.08in.)
maximum
1 mm
(0.04in.)
maximum
70.5mm
(+0.25, -0mm)
(2.78in.[+0.01, -0in.]) 72.5mm
(+0.25, -0mm)
(2.85in.[+0.01, -0in.])
PFXGP4401
TADR
174.5mm (+0.5, -0mm) (6.87in.[+0.02, -0in.])
134.2mm
(+0.5, -0mm)
(5.28in.
[+0.02, -0in.])
86.3mm
(+0.25, -0mm)
(3.4in. [+0.01, -0in.]) 88.2mm
(+0.25, -0mm)
(3.47in. [+0.01, -0in.])
PFXGP4501
TADR
241mm (+0.5, -0mm) (9.49in.[+0.02, -0in.])
188mm
(+0.5, -0mm)
(7.4in.
[+0.02, -0in.])
119.2mm
(+0.25, -0mm)
(4.69in. [+0.01, -0in.]) 121.8mm
(+0.25, -0mm)
(4.8in. [+0.01, -0in.])
PFXGP4601
TADR
289.4mm (+0.5, -0mm) (11.39in.[+0.02, -0in.])
214.4mm
(+0.5, -0mm)
(8.44in.
[+0.02, -0in.])
142.4mm
(+0.25, -0mm)
(5.61in. [+0.01, -0in.]) 147mm
(+0.25, -0mm)
(5.79in. [+0.01, -0in.])
%
<
<
D
H
D
G
G
D
$
$ $ &
; ;
D
5
%
<
<
H
E
E
E
E
; ;
5
$
$ $
Rear panel (resin plate) surface Rear panel (resin plate) surface