Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" - Manual (Page 36)

38
Eng
lis
h
Installation
10 When installing the GP unit with the flat mount orientation, affix the
Overlay to the front of the GP unit.
In advance, align the four corners of the Overlay outline on the
panel as shown in the figure, and then mark these corners.
Peel off the removable paper layer from the Overlay, align the
Overlay with the four marks, and then affix the Overlay to the panel.
1) Locations to mark (four locations)
2) Overlay outline
e) Display area
Note : Use the Overlay manufactured by Pro-face. Use one of the following
models.
• PFXZGPFSR6W1 (for the PFXGP4301TADR)
• PFXZGPFSR7W1 (for the PFXGP4401TADR)
• PFXZGPFSR10W1 (for the PFXGP4501TADR)
• PFXZGPFSR12W1 (for the PFXGP4601TADR)
); );
)<
)<
H
mm(in.)
(dimension tolerance: ±0.2 mm (±0.01 in.))
FX FY
PFXGP4301TADR 84.0 (3.31) 66.0 (2.60)
PFXGP4401TADR 99.7 (3.93) 78.6 (3.09)
PFXGP4501TADR 133.3 (5.25) 105.5 (4.15)
PFXGP4601TADR 158.5 (6.24) 118.7 (4.67)